User manual

5-50 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Message Field
The following message is displayed in the message field during
an aborted status:
"Press [Start] to begin a test."
The word surrounded by [ ] in the message field denotes the
softkey.
Explanation
The measurement results up to an abort of the test are shown.
The status of the Tester is reset to stand-by.
The condition of the mobile phone is not ensured; therefore, the
mobile phone power-on process is required to be repeated for a
new test.
Table 5-13 [Automatic Test] Aborted Screen Mobile Phone Information
Item Information Description
IMSI Displays the International Mobile Subscriber Identity
received from the mobile phone.
IMEI Displays the International Mobile Station Equipment
Identity received from the mobile phone.
Caller ID Displays addresser number sent from the Tester at BS Call
execution.
Dialed No. Displays the number dialed from the mobile phone at MS
call execution.