User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-47
Abort Screen
When the Abort softkey is pressed, the measurement is aborted.
Depending on their previous settings of the screen softkeys,
selecting the Simple, the Detail or the Value softkey causes the
tester to display the Stand-by aborted simplified screen, the
Stand-by aborted detailed screen or the Stand-by aborted value
screen. Figure 5-23 shows the simplified screen.
Figure 5-23 [Automatic Test: Stand-by] Aborted Simplified Screen
Softkey Menu Field
Softkey Menu 1
Start: Starts testing the mobile phone by Automatic Test.
Previous Screen: Changes the screen to the previous sequence
one. This softkey is inactivated when the screen of Sequence 1 is
displayed.
Next Screen: Changes the screen to the next sequence one. This
softkey is inactivated when Sequence 2 is set to "Off" or the
screen of Sequence 2 is displayed.
Screen>>: Displays the softkey menu 3 containing the softkeys
to select a display mode.