User manual

5-46 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Screen Field
The information from the mobile phone and the tester is
displayed at the upper right corner in the screen field. The
description of the displayed information is shown in Table 5-11.
Message Field
The following message is displayed in the message field during
Talk test on Measuring Talk screens. The user is required to
respond to the operation message to evaluate the quality of loop
back voice:
"Press [Pass] or [Fail] for Voice Echo test."
The word surrounded by [ ] in the message above denotes
softkey.
Table 5-11 Mobile Phone Information in [Auto Test: Measuring Talk]
Screen
Item Information Description
IMSI Displays the International Mobile Subscriber Identity
received from the mobile phone.
IMEI Displays the International Mobile Station Equipment
Identity received from the mobile phone.
Caller ID Displays addresser number sent from the tester at BS Call
execution. The set value is displayed at this state.
Dialed No. Displays the dialed number received from the mobile
phone at MS Call execution.