User manual

5-42 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Screen Field
The information from the mobile phone and the Tester as
Table 5-9 is displayed at the upper right corner in the screen
field.
The followings are also displayed in the screen field.
3GPP-SYS and SIG-PTN
The 3GPP system and the signaling pattern that are currently
set on the Configuration: Test Condition screen are displayed at
the lower-right corner of the screen.
RF On indicator
"RF On" indicator at the lower-left corner of the screen is
displayed only when the RF signal from the Tester is output to
the RF In/Out connector.
Message Field
The following message is displayed on the Measuring screens in
execution of Location Update, MS call, BS call, MS Release or BS
Release.
"Press the desired softkey."
Table 5-9 Mobile Phone Information in [Auto Test: Measuring] Screen
Item Information Description
IMSI Displays the International Mobile Subscriber Identity
received from the mobile phone.
IMEI Displays the International Mobile Station Equipment
Identity received from the mobile phone.
Caller ID Displays addresser number sent from the tester at BS Call
execution. The set value is displayed at this state.
Dialed No. Displays the number dialed from the mobile phone at MS
Call execution.