User manual

5-36 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
More (1 of 2): Displays the softkey menu 2.
Return: Returns to the [Initial] screen.
Softkey Menu 2 Print Screen: Prints a hardcopy of the screen or
saves an image file of the screen into a USB memory device
depending on the setting of the "Printer" input field on the
[Configuration] screen.
More (2 of 2): Returns to the softkey menu 1.
Softkey Menu 3
Simple: Displays a Pass/Fail result of whole measurement in the
middle of the measurement result field in zoom.
Detail: Displays a Pass/Fail result at each item cell in the
measurement result field.
Value: Displays a measurement value at each item cell in the
measurement result field.
Cancel: Cancels selecting the display mode and returns to the
softkey menu 1.
Screen Field
Set the input fields in the screen field according to the following
description in Table 5-6 to execute a new test.
Table 5-6 [Automated Test: Stand-by] Screen Input Fields
Input Field Description
Procedure Displays a list of parameter file names stored in the tester for
selection if the tester contains parameter files.
Select a file to recall parameters for a test.
If the tester is using a parameter file, the file name is shown
in this field