User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-29
Figure 5-13 [PRESET Mode] Screen (in W-CDMA System)
Softkey Menu Field
Softkey Menu
Factory Default: All the parameters of the Tester other than
parameters related to external control revert to the factory
default. After selecting this softkey, the [Top Menu] screen or
the [Initial] screen of the W-CDMA is displayed. This influences
the parameters of GSM, W-CDMA and cdma2000.
Starting Condition: Values in the input fields revert to those values
when the Tester was booted. The softkey memory (channel,
frequency and level) and the values for the Caller ID and the
Authentication Key that were set through remote control
commands do not revert. After selecting this softkey, the [Top
Menu] screen or the [Initial] screen of the W-CDMA is
displayed. This influences the parameters of GSM, W-CDMA and
cdma2000.
Do nothing: Initialization of the parameters is not performed.
After selecting this softkey, the [Top Menu] screen or the
[Initial] screen of the W-CDMA is displayed.