User manual

5-26 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Message Field
The following message is displayed in the message field:
"Select a Test Mode or Configuration."
Table 5-3 [Initial] Screen Input Field
Input Field Description
Procedure Displays a list of parameter file names stored in the Tester for selection if the Tester contains
parameter files. Select a file to recall parameters for a test.
If the Tester is using a parameter file, the file name is shown in this field
Current System Displays a system being run.
Select the test mode from "GSM", "W-CDMA" or "CDMA2000". W-CDMA is valid when the W00
option is installed. CDMA2000 is valid when the C00 option, C01 option and C02 option (1xEV-DO)
is installed.