User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-25
Softkey Menu Field
Softkey Menu 1
Automatic Test: Displays the [Automatic Test: Stand-by] screen.
Refer to “Automatic Test" on page 5-30
Manual Test: Displays the [Manual Test: Stand-by] screen. Refer
to “Manual Test" on page 5-59
TX Analyzer: Displays the [TX Analyzer: Stand-by] screen. Refer
to “TX Analyzer" on page 5-126
Signal Generator: Displays [Signal Generator] screen. Refer to
“Signal Generator" on page 5-140
More (1 of 2): Displays the softkey menu 2.
Config: Displays the [Configuration] screen. Refer to
“Configuration" on page 5-145
Softkey Menu 2
Print Screen: Prints the hard-copy of the screen or stores the
screen image in the USB memory device, according to the
"Printer" setting on the [Configuration] screen.
Return to Menu: Displays the [Return to Menu]screen for
returning the [Top Menu] screen. Refer to “Return to Menu
Screen" on page 5-27
More (2 of 2): Returns to the softkey menu 1.
Screen Field
The firmware name and revision number currently installed are
displayed on this screen:
Set the input fields in the screen field according to the following
description of Table 5-3 to execute a new test.