User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-13
Firmware Update Screen
Insert a USB memory device which contains the firmware to the
USB connector on the front panel of the Tester.
Press the Config softkey on the [Top Menu] screen, and press the
FW Update softkey. The [Firmware Update] Screen as Figure 5-7
is displayed.
On this screen, the following information is displayed:
• Revision:
Displays the current revision and the revision of the
firmware in the USB memory device.
• "?.??.??":
Indicates that there is no file in the USB memory device for
firmware update.
• "-.--.--" or "*.**.**":
Indicates that the firmware is not installed in the Tester.
• "(complete)":
Indicates that the firmware, which is contained in the USB
memory device, is updated completely. It is displayed in the
USB version display area.