User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-11
• Options that are already installed.
Option Installation/Backup
On the [Configuration] screen, you can install/back up option
functions. such as C01, C02, W00, and G00.
Option Install
Install option functions to the Tester. There are two way to
install it. One is using a USB memory device. The other is not
using a USB memory device.
Using a USB memory Device
Prepare a USB memory device which contains an option key.
1 Press the Config softkey on the [Top Menu] screen to
display the [Configuration] screen.
2 Insert a USB memory device which contains the option key
to the USB connector on the front panel of the Tester.
3 Press the Option Install softkey.
4 The option number is added in the "Option" field in the
information field. Remove the USB memory device from the
Tester.
Unusing a USB memory Device
Prepare the 16 digits option key.
1 Press the Config softkey on the [Top Menu] screen to
display the [Configuration] screen.
2 Sets the 16 digits option key to the Option Install field with
the CURSOR CONTROL knob.
3 Press the Option Install softkey.
4 The option number is added in the "Option" field in the
information field.
NOTE
To install options, a suitable option key for the option is required. For
further information, contact the Agilent Sales Department or a licensed
distributor.