User manual
5-10 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
† The changing magnification softkey is available. Refer to “Changing Magnification
Softkey" on page 4-13.
In addition, this screen displays the following information:
• Serial number
• Revision number of RF CPU software.
• Revision number of MC-1x CPU software. (Only when the
C00 and C01 options are installed.)
• Revision number of 1xEV-DO CPU software. (Only when the
C00, C01 and C02 option are installed.)
Printer Sets the destination to which the print data is sent to "USB Memory" or "EPSON PM-G800", when the
Print Screen softkey is pressed.
• USB Memory: Saves the image of the screen into a USB memory device. The file format is PNG
(Portable Network Graphics).
• EPSON PM-G800: Prints a hardcopy of the screen with the specified printer
Beeper Sets beep.
Selects "On" or "Off".
• On: Beeps for each step of operation.
• Off: Beeps only for noticing some errors and warnings.
AutoBoot Specifies the system for automatic boot when a certain time (time-out period) has passed since the
[Top Menu] screen was displayed.
• Application: Selects a system from the followings:
• None: No automatic boot occurs.
• FUNC GSM: Boots the GSM option.
• FUNC W-CDMA: Boots the W-CDMA option.
• FUNC CDMA2000: Boots the cdma2000 option.
• Timer: Sets the time out timer (10 to 60 seconds) or "----". The timer is stopped when any softkey
is pressed.
• ----: Disables the setting for the time out timer.
• 10 to 60: Sets the time-out timer.
Date/Time † Sets the current date and time in the following format.
• YYYY: Sets the year. The allowable range is from 1990 to 2037.
• MM: Sets the month. The allowable range is from 01 to 12.
• DD: Sets the day. The allowable range is from 01 to 31.
• HH: Sets the hour. The allowable range is from 00 to 23.
• MM: Sets the minute. The allowable range is from 00 to 59.
Option Install Installs Option. Set the 16 digits option key and press the Option Install softkey to install an option.
When using this function, do not insert a USB memory device.
Table 5-1 [Configuration] Screen Input Field
Input Field Description