User manual

5-6 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Screen Field
The firmware name, revision number currently installed and
serial number are shown in this field.
Message Field
The following message is displayed in the message field:
"Select a Radio System or Configuration."
NOTE
When the AutoBoot function is set to "FUNC GSM", "FUNC W-CDMA" or
"FUNC CDMA2000", the Tester automatically selects the GSM, W-CDMA
or cdma2000 system mode if no softkey is pressed within the specified
time (10 to 60 seconds). When the Tester is shipped, the AutoBoot
function is set to "None". Refer to the “AutoBoot" on page 5-10 for
details.