User manual

Operating Procedures 4
N9360A Multi UE Tester W-CDMA User Manual 4-77
Ending A Test
Disconnecting the Mobile Phone
Disconnect the mobile phone from the connection cable or the
antenna coupler.
Remove the TEST USIM card from the mobile phone.
Turning off the Tester at the End of Test
1 Press and hold the LINE switch on the front panel of the
Tester for more than one second.
2 The display blacks out, and the LINE LED on the front
panel turns to orange.
3 The power is now turned off except for the reference
oscillator in the tester.
4 Turn off the Line switch on the rear panel of the tester to
turn off the reference oscillator.
5 All power including the reference oscillator is now turned
off and the LINE LED goes off.
CAUTION
Do not turn off the Line switch on the rear panel of the tester while
the LINE LED on the front panel of the tester is green. Tester failure
may occur otherwise.