User manual

Operating Procedures 4
N9360A Multi UE Tester W-CDMA User Manual 4-73
Testing a Mobile Phone by Signal Generator
This section describes the testing of mobile phones using the
Signal Generator capabilities of the tester.
1 Turn on the Tester and select the W-CDMA system on the
[Top Menu] screen. Refer to
“System Selection" on
page 4-14 about selection of the system.
2 The [Initial] screen as Figure 4-62 is displayed after
completion of initialization and self-test routine of the
Tester.
Figure 4-62 [Initial] Screen