User manual

Operating Procedures 4
N9360A Multi UE Tester W-CDMA User Manual 4-67
Testing a Mobile Phone by TX Analyzer
This section describes the method to test on the mobile phone
with the TX Analyzer. Using the TX Analyzer, measurements are
executed without the signaling process.
1 Turn on the Tester and select the W-CDMA system on the
[Top Menu] screen. Refer to
“System Selection" on
page 4-14 about selection of the system.
2 The [Initial] screen as Figure 4-56 is displayed after
completion of initialization and self-test routine of the
Tester.
Figure 4-56 [Initial] Screen