Technical data

70 Programmer’s Guide
5 Command Reference
Instrument Subsystem
The instrument subsystem includes commands selecting the instrument
modes or power measurement mode.
Instrument Mode Switch
:INSTrument[:SELect] SA|TGENerator|MA|POWme-
ter|CAT
:INSTrument[:SELect]?
This command selects the instrument mode of HSA. All the instrument
modes are under Mode list of HSA unit.
SA - Spectrum Analyzer mode.
TGENerator - Tracking Generator mode.
MA - Modulation Analysis mode.
POWmeter - Power Meter mode.
CAT - Cable and Antenna Test mode
*RST: SA
Example: :INSTrument TGENerator
Key access: MODE
Measurement Mode Switch
:INSTrument:MEASure OFF|CHPower|ACPR|OBW|SPEC-
trogram|SEM|CHScanner
:INSTrument:MEASure?
This command selects the specific power measurement mode.
CHPower - Channel Power Measurement
ACPR - Adjacent Channel Power Ratio Measurement
OBW - Occupied Bandwidth Measurement
SPECtrogram - Spectrum Monitor