Technical data

60 Programmer’s Guide
5 Command Reference
System Preset
:SYSTem:PRESet
Use this command to preset the instrument. The preset type is based on
the setting of Preset Type: DFT, User or Last.
Key access: Preset
Factory Default
:SYSTem:FDEFault
Set both the measure and setting parameters to factory preset
parameters.
Key access: Shift > System > More > Factory Default
GPS State
:SYSTem:CONGigure:GPS OFF|ON|0|1
:SYSTem:CONFigure:GPS?
Use this command to turn on/off the built-in GPS in the analyzer. This
command is only available with the option GPS installed.
Key access: Shift > System > More > GPS On/Off
Sync to GPS Status
:SYSTem:CONFigure:GPS:SYNC OFF|ON|0|1
:SYSTem:CONFigure:GPS:SYNC?
Use this command to turn on/off the synchronization HSA time base to
GPS. This command is only available with the option GPS installed, and
GPS feature is turned on.
Key access: Shift > System > More > GPS > Sync to GPS On/Off