Technical data

Command Reference 5
Programmer’s Guide 213
Power Meter Trigger Holdoff Time
TRIGger[:SEQuence]:HOLDoff <value>
TRIGger[:SEQuence]:HOLDoff?
This command defines the trigger hold off time of power meter.
Range: 1 us to 400 ms
Example: :TRIGger:SEQuence:HOLDoff 0.1
Key access: Meas > Peak Setup > Trig/Acq > More 1 of 2 > Holdoff
Power Meter Trigger Hysteresis Value
:TRIGger[:SEQuence]:HYSTeresis <value>
:TRIGger[:SEQuence]:HYSTeresis?
This command defines the trigger hysteresis value of power meter.
Example: :TRIGger:SEQuence:HYSTeresis 1
Key access: Meas > Peak Setup > Trig/Acq > More 1 of 2 > Hysteresis