Technical data

206 Programmer’s Guide
5 Command Reference
Set Trace X Scale Time
:SENSe:TRACe:TIME <value>
:SENSe:TRACe:TIME?
This command defines the trace X scale time of peak power sensor.
Range: 20 ns to 100 ms
Example: :SENSe:TRACe:TIME 0.001
Key access: Meas > Peak Setup > Trace Setup > X Scale
Set Trace Y Max Value
:SENSe:TRACe:YMAX:TIME <value>
:SENSe:TRACe:YMAX:TIME?
This command defines the trace Y max value of peak power sensor.
Range: –150 to +230 dBm
Example: :SENSe:TRACe:YMAX:TIME 1
Key access: Meas > Peak Setup > Trace Setup > Y Max
Set Trace Y Scale Value
:SENSe:TRACe:Y:TIME <value>
:SENSe:TRACe:Y:TIME?
This command defines trace Y scale value of peak power sensor.
Example: :SENSe:TRACe:Y:TIME 1
Key access: Meas > Peak Setup > Trace Setup > Y Max
Set Gate Start Time
[:SENSe]:SWEep[1]:OFFSet:TIME <value>
[:SENSe]:SWEep[1]|:OFFSet:TIME?
This command specify the gate start time of peak power meter.
Range: –1 to 1 s
Example: :SWEep1:OFFSet:TIME 1
Key access: Meas > Peak Setup > Gate Setup > Start