Technical data

Command Reference 5
Programmer’s Guide 203
Set Power Meter Reference Power Value
[:SENSe]:CORRection:CSET1[:INPut][:MAGNitude]
<value>
[:SENSe]:CORRection:CSET1[:INPut][:MAGNitude]?
This command defines the reference power value.
Example: –200 to +200 dBm
Example: :CORRection:CSET1:INPut:MAGNitude 10dBm
Key access: Meas > General Setup > Rel/Offset > Rel
Set Power Meter Offset State
[:SENSe]:CORRection:GAIN2:STATe OFF|ON|0|1
[:SENSe]:CORRection:GAIN2:STATe?
This command turns on/off offset state for power meter measurement.
Example: :CORRection:GAIN2:STATe 1
Key access: Meas > General Setup > Rel/Offset > Offset
Set Power Meter Offset Value
[:SENSe]:CORRection:GAIN2[:INPut][:MAGNitude]
<value>
[:SENSe]:CORRection:GAIN2[:INPut][:MAGNitude]?
This command defines the offset value of power meter measurement.
Example: :CORRection:GAIN2:INPut:MAGNitude 15
Key access: Meas > General Setup > Rel/Offset > Offset
Set Power Meter Average State
[:SENSe]:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:AVERage[:STATe]?
Use this command to turn on/off power meter average state.
Example: :AVERage:STATe 1
Key access: Meas > General Setup > Average > Average On/Off