Technical data

Command Reference 5
Programmer’s Guide 183
ASK Average Count
[:SENSe]:DMA:AVERage:COUNt <value>
[:SENSe]:DMA:AVERage:COUNt?
Use this command to specify average count number in ASK
demodulation analysis.
Example: :DMA:AVERage:COUNt 20
Key access: Meas > Average Number
ASK Symbol Rate
[:SENSe]:DMA:RADio:STANdard:SRATe <value>
[:SENSe]:DMA:RADio:STANdard:SRATe?
Use this command to specify symbol rate for ASK demodulation
analysis.
Range: 100 sps to 100 ksps
Example: :DMA:RADio:STANdard:SRATe 2ksps
Key access: Meas > Symbol Rate
ASK Measurement Filter
[:SENSe]:DMA:RADio:STANdard:FILTer:MEASurement
NONE|RNYQuist|NYQuist|GAUSsian
[:SENSe]:DMA:RADio:STANdard:FILTer:MEASurement?
Use this command to set the measurement filter in ASK demodulation
analysis.
Range: RNYQuist, NYQuist, GAUSsian, NONE
Example: :DMA:RADio:STANdard:FILTer:MEASurement RNYQuist
Key access: Meas > Filter Setup > Meas Filter