Technical data

176 Programmer’s Guide
5 Command Reference
Query FM Modulation Rate
:CALCulate:AMA:MRATe?
Use this command to query FM modulation rate measurement result in
FM demodulation analysis.
Example: :CALCulate:AMA:MRATe?
Query FM Frequency Deviation
:CALCulate:FM:FDEViation?
Use this command to query FM frequency deviation test result.
Example: :CALCulate:FM:FDEViation?
FM Average Count
[:SENSe]:AMA:AVERage:COUNt <value>
[:SENSe]:AMA:AVERage:COUNt?
This command sets average count number in FM demodulation
analysis.
Example: :AMA:AVERage:COUNt 50
Key access: Meas > Average Number
FM Average Count State
[:SENSe]:AMA:AVERage OFF|ON|1|0
[:SENSe]:AMA:AVERage?
This command turns on/off average state in the FM demodulation
analysis.
Example: :AMA:AVERage 1
Key access: Meas > Average Number