Technical data

152 Programmer’s Guide
5 Command Reference
Top N/Bottom N Measurement Rule
:CHSCanner:SWEep:TOPBottom:RULE:MEASure
SPEed|ACCUracy
:CHSCanner:SWEep:TOPBottom:RULE:MEASure?
Use this command to toggle the top/bottom N measurement rule
between speed and accuracy.
Example: :CHSCanner:SWEep:TOPBottom:RULE:MEASure ACCUracy
Key access: Meas > Setup > Measurement Rule
Top N/Bottom N Search Rule
:CHSCanner:SWEep:TOPBottom:RULE SPEed|ACCUracy
:CHSCanner:SWEep:TOPBottom:RULE?
This command toggles the top/bottom N measurement rule between
speed and accuracy. It’s only available for Top N and Bottom N sweep
mode.
Example: :CHSCanner:SWEep:TOPBottom:RULE ACCUracy
Key access: Meas > Setup > Search Rule
Top C yc le
:CHSCanner:SWEep:TOP:CYCLe[:STATe] OFF|ON|0|1
:CHSCanner:SWEep:TOP:CYCLe[:STATe]?
Use this command to turn on/off Top Cycle state. It’s only available for
Top N sweep mode.
:CHSCanner:SWEep:TOP:CYCLe:VALue <value>
:CHSCanner:SWEep:TOP:CYCLe:VALue?
Use this command to define the Top Cycle value. It’s only available for
Top N sweep mode.
Range: 1 to 10000
Example: :CHSCanner:SWEep:TOP:CYCLe:VALue 30
Key access: Meas > Setup > Top Cycle