Technical data

Command Reference 5
Programmer’s Guide 147
CAT Define Limit Value
:CALCulate:LLINe[1]|2:DATA
<x-axis>,<ampl>,<connected>{,<x-axis>,<ampl>,<co
nnected>}
:CALCulate:LLINe[1]|2:DATA?
This command defines the limit value in cable and antenna
measurement mode.
Example: :CALC:LLIN1:DATA
1000000000,-20,0,200000000,-30,1
Key access: Shift > Limit > Limit1 > Edit Limits