Technical data

146 Programmer’s Guide
5 Command Reference
CAT Get Limits Result
:CALCulate:LLINe[1]|2:FAIL?
This command query the result of limit line or limit in cable and antenna
measurement mode.
Example: :CALCulate:LLINe1:FAIL?
CAT Define Limit Value
:CALCulate:LLINe[1]|2:DATA
<x-axis>,<ampl>,<connected>{,<x-axis>,<ampl>,<co
nnected>}
:CALCulate:LLINe[1]|2:DATA?
This command defines the limit value in cable and antenna
measurement mode.
Example: :CALC:LLIN1:DATA
1000000000,-20,0,200000000,-30,1
Key access: Shift > Limit > Limit1 > Edit Limits
CAT Delete Limit Data
:CALCulate:LLINe[1]|2:DELete
This command delete the current defined limit value.
Example: :CALCulate:LLINe1:DELete
CAT Get Limits Result
:CALCulate:LLINe[1]|2:FAIL?
This command query the result of limit line or limit in cable and antenna
measurement mode.
Example: :CALCulate:LLINe1:FAIL?