Technical data

Command Reference 5
Programmer’s Guide 135
CAT IIM State
[:SENSe]:CAT:IIM[:STATe] OFF|ON|0|1
[:SENSe]:CAT:IIM[:STATe]?
Use this command to turn on/off IIM state for cable and antenna
measurement.
Example: :CAT:IIM ON
Key access: Meas > IIM
CAT Display Type
[:SENSe]:CAT:DISPlay:TYPE RL|VSWR|LIN
[:SENSe]:CAT:DISPlay:TYPE?
Toggles the cable and antenna display mode between RL, VSWR and
LIN. The RL stands for Return Loss, and LIN stands for Reflection
Coefficient. It’s only available for Reflection Measurement mode, and
Distance to Fault measurement mode.
Range: RL, VSWR, LIN
Example: :CAT:DISPlay:TYPE VSWR
Key access: Meas > Disp Mode
CAT Set Cable Type
[:SENSe]:CAT:CABLe:TYPE S1000| S2000| S2500|CUST
[:SENSe]:CAT:CABLe:TYPE
Toggles the cable type between S1000, S2000, S2500 and CUST. CUST
stands for custom cable type. It’s only available for Distance To Fault
measurement.
Range: S1000, S2000, S2500, CUST
Example: :CAT:CABLe:TYPE S1000
Key access: Meas > More 1 of 2 > Cable Specification > Cable Type