Technical data

6 Programmer’s Guide
1 Getting Started
Connecting the Analyzer via the LAN Port
No extra driver is required to connect the analyzer via the LAN port to a
PC. All you need is the Agilent IO libraries suite in the Product CD
Help Kit. Or refer to the link below to download the IO libraries suite:
http://www.agilent.com/find/iolib
Please refer to the following steps to finish the connection:
1 Switch on the analyzer.
2 Connect the spectrum analyzer to a PC with a LAN cable.
3 Press [SYS] > {Setting} > {IP Admin} > {IP address} to set IP address
for the instrument. For example, set “10.0.0.5” as the IP address for the
instrument. Press {Apply} as
4 Run Agilent Connection Expert in IO libraries suite. Right-click on the
LAN (TCPIP0) icon, select “Add Instrument’ in the pop-up menu. The
“Add LAN Instruments” window displays for the IP configuration.
5 Select “Add Address”, check “Use IP Address” in the window and input
the IP address as the instrument IP address you set before.