Technical data

Command Reference 5
Programmer’s Guide 127
Spectrum Monitor Option Subsystem
The spectrum monitor subsystem provides you the SCPI commands
reference for the spectrum monitor function. Use the command
:INSTrument SA, and:INSTrument:MEASure SPECtrogram
to access this subsystem.
Option SIM is required to enable this function.
Spectrogram State
[:SENSe]:SPECtrogram:STATe RUN|PAUSe
[:SENSe]:SPECtrogram:STATe?
Use this command to run or pause spectrogram measurement.
Example: :SPECtrogram:STATe PAUSe
Key access: Meas > Spectrogram Run/Pause
Spectrogram Restart Measurement
[:SENSe]:SPECtrogram:RESTart
Use this command to restart spectrogram measurement.
Example: :SPECtrogram:RESTart
Key access: Meas > Restart Meas
Spec Update Interval
[:SENSe]:SPECtrogram:UINTerval <value>
[:SENSe]:SPECtrogram:UINTerval?
This command defines the update interval of spectrogram measurement.
Example: :SPECtrogram:UINTerval 1 s
[:SENSe]:SPECtrogram:UINTerval:STATe OFF|ON|0|1
[:SENSe]:SPECtrogram:UINTerval:STATe?
Use this command to turn on/off update interval of current test.
Example: :SPECtrogram:UINTerval:STATe ON
Key access: Meas > Update Int.