Technical data

Command Reference 5
Programmer’s Guide 125
Query SEM Lower Offset Peak Frequency
[:SENSe]:SEMask:OFFSet:LIST:LOWer:PEAK:FRE-
Quency?
Use this command to query the peak power frequency of each lower
offset channel in SEM measurement.
Example: :SEMask:OFFSet:LIST:LOWer:PEAK:FREQuency?
Query SEM Upper Offset Fail Flag
[:SENSe]:SEMask:OFFSet:LIST:Upper:FAIL?
Use this command to query fail flag of each upper offset channel in
SEM measurement.
Example: :SEMask:OFFSet:LIST:UPPer:FAIL?
Query SEM Upper Offset Power
[:SENSe]:SEMask:OFFSet:LIST:UPPer:POWer?
Use this command to query the measured power of each upper offset
channel in SEM measurement.
Example: :SEMask:OFFSet:LIST:UPPer:POWer?
Query SEM Upper Offset Peak Frequency
[:SENSe]:SEMask:OFFSet:LIST:Upper:PEAK:FRE-
Quency?
Use this command to query the peak power frequency of each upper
offset channel in SEM measurement.
Example: :SEMask:OFFSet:LIST:LOWer:PEAK:FREQuency?
SEM Fail Setting Log
[:SENSe]:SEMask:FAIL:LOG OFF|ON|0|1
[:SENSe]:SEMask:FAIL:LOG?
Use this command to switch the Fail log status of SEM measurement.
Example: :SEMask:FAIL:LOG ON
Key access: Meas > SEM > Fail Setting > Log