Technical data

122 Programmer’s Guide

5 Command Reference

SEM Offset Sweep Time

[:SENSe]:SEMask:OFFSet:LIST:SWEeptime

[:SENSe]:SEMask:OFFSet:LIST:SWEeptime?

Use this command to specify the related sweep time of offset channels

in SEM measurement. The unit for the time in this command is second.

[:SENSe]:SEMask:OFFSet:LIST:SWEeptime:AUTO

OFF|ON|0|1,...

[:SENSe]:SEMask:OFFSet:LIST:SWEeptime:AUTO?

Use this command to turn on/off automatically setting of sweep time of

reference channels in SEM measurement.

Example: :SENSe:SEMask:OFFSet:LIST:SWEeptime

10,10,10,10,10

Key access: Meas > SEM > Offset/Limit > Sweep Time

SEM Offset Abs StartAmpt

[:SENSe]:SEMask:OFFSet:LIST:STARt:ABSolute

[:SENSe]:SEMask:OFFSet:LIST:STARt:ABSolute?

Use this command to specify the start frequency amplitude of offset

channel absolute limit mask in SEM measurement. Before use this

command, the fail mask type should be set to “Absolute” or “Abs AND

Rel” or “Abs OR Rel”.

Example: SENSe:SEMask:OFFSet:LIST:STARt:ABSolute -14,

-14,-15,-20,-20

Key access: Meas > SEM > Offset/Limit > More 1 of 3 > Abs StratAmpt