Technical data

Getting Started 1
Programmer’s Guide 3
Connecting the Analyzer via the USB Port
No extra driver is required to connect the analyzer via the USB port to a
PC. All you need is the Agilent IO libraries suite and you can find this
IO libraries suite in the documentation CD in the shipment along with
your analyzer. Or download the IO libraries suite from Agilent website:
http://www.agilent.com/find/iolib
Refer to the following steps to finish the connection:
1 Install Agilent IO libraries suite on your PC
2 Switch on the analyzer
3 Connect the analyzer to a PC with a USB cable.
Connecting instrument
Connecting PC