Technical data

Command Reference 5
Programmer’s Guide 101
Query Marker Readout: Y Value
:CALCulate:MARKer[1]|2|3|4|5|6:Y?
This command reads the current Y value for the designated marker or
delta on its assigned trace. The value is in the Y-axis units for the current
trace.
This command can be used to read the results of marker functions such
as and noise that are displayed in the marker value field on the analyzer.
Example: :CALCulate:MARKer1:Y?
Marker Demod Type
:CALCulate:MARKer:DEMod:TYPE AM|FM
:CALCulate:MARKer:DEMod:TYPE?
Toggles the marker demodulation function between amplitude
modulation and frequency modulation.
Key access: Marker
> Mode > Demod Setting > Demod Type
Marker Demod Speaker Volume
:CALCulate:MARKer:DEMod:SVOLume <para>
:CALCulate:MARKer:DEMod:SVOLume?
Sets the speaker volume for the demodulated signal.
Key access: Marker
> Mode > Demod Setting > Speaker Vol
Marker Demod Delay Time
:CALCulate:MARKer:DEMod:DTIMe <para>
:CALCulate:MARKer:DEMod:DTIMe?
Sets the delay time for the marker demodulation.
Key access: Marker
> Mode > Demod Setting > Delay Time