Technical data

98 Programmer’s Guide
5 Command Reference
Peak Search Type
:CALCulate:MARKer:PEAK:SEARch:MODE MAXimum|MINi-
mum
:CALCulate:MARKer:PEAK:SEARch:MODE?
Specifies the peak search type. When it is set to maximum, the places
the selected marker on the highest point on the assigned trace. When it
is set to minimum, the places the selected marker on the lowest point on
the assigned trace.
Example: :CALCulate:MARKer:PEAK:SEARch:MODE MINimum
Key access: Shift > Peak
> More > PK Criteria > Peak Type
Peak Threshold
:CALCulate:MARKer:PEAK:THReshold <value>
:CALCulate:MARKer:PEAK:THReshold?
Specifies the minimum signal level for the analyzers internal peak
identification routine to recognize a signal as a peak. This applies to all
traces and all windows.
Preset: –140 dBm
Example: :CALCulate:MARKer:PEAK:THReshold -30 dBm
Key access: Shift > Peak
> More > PK Criterion > Peak Threshold
Peak to Peak Delta Markers
:CALCulate:MARKer[1]|2|3|4|5|6:PTPeak
Positions a pair of delta markers on the highest and lowest points on the
trace.
Example: :CALCulate:MARKer2:PTPeak
Key access: Peak > Pk-Pk Search