User`s guide
Table Of Contents
- Overview
- Getting Started
- System Setting
- Making Measurements
- Measuring Multiple Signals
- Measuring a Low-Level Signal
- Improving Frequency Resolution and Accuracy
- Making Distortion Measurements
- One-button Power Measurement
- Making a Stimulus Response Transmission Measurement
- Measuring Stop Band Attenuation of a Low-pass Filter
- Making a Reflection Calibration Measurement
- Measuring Return Loss Using the Reflection Calibration Routine
- Making an Average Power Measurement
- Key Reference
- SCPI Command Reference
- Error Messages
- Menu Map
INSTrument Subsystem 134
MEASure Subsystem 135
SENSe Subsystem 139
SYSTem Subsystem 149
TRACe Subsystem 150
Tracking Generator Subsystem 151
TRIGer Subsystem 155
UNIT Subsystem 156
7Error Messages
Error Message List 158
8 Menu Map
AMPTD 162
BW/SWP 163
FREQ 164
MARKER 165
MEAS 166
SPAN 167
SYS 168
TRACE 169
Limit 170
Documentation Conventions:
1. A pair of curly brackets { } indicates a softkey, for example
{Start} refers to the Start softkey.
2. A pair of square brackets [ ] indicates a hardkey,
for example, [ENTER] refers to the ENTER hardkey.
3. “Analyzer” refers to Agilent N9340A handheld spectrum ana-
lyzer in the following chapters.
4. “DUT” refers to a device under test.