User`s guide
Table Of Contents
- Overview
- Getting Started
- System Setting
- Making Measurements
- Measuring Multiple Signals
- Measuring a Low-Level Signal
- Improving Frequency Resolution and Accuracy
- Making Distortion Measurements
- One-button Power Measurement
- Making a Stimulus Response Transmission Measurement
- Measuring Stop Band Attenuation of a Low-pass Filter
- Making a Reflection Calibration Measurement
- Measuring Return Loss Using the Reflection Calibration Routine
- Making an Average Power Measurement
- Key Reference
- SCPI Command Reference
- Error Messages
- Menu Map
System Setting 4
N9340A User’s Guide 39
Factory Default Settings
For more information about saving a user- defined
preset, refer to “Selecting a preset type” and
“Saving a User- defined Preset" on page 24.
Parameter Default Setting
Center Frequency 1.5 GHz
Start Frequency 0.0 Hz
Stop Frequency 3.0 GHz
Span 3.0 GHz
Reference Level 0.0 dBm
Attenuation Auto (20 dB)
Scale/DIV 10 dB/DIV
Scale Type Log
RBW Auto (1 MHz)
VBW Auto (1 MHz)
Average Type Log Power
Sweep time Auto
Sweep Mode Normal
Trace 1 Clear write
Trac e 2 Bla nk
Trac e 3 Bla nk
Trac e 4 Bla nk
Trac e 1 Detectio n Pos Peak
Trace 2 Detection Pos Peak
Trace 3 Detection Pos Peak
Trace 4 Detection Pos Peak
Trace Average All Off
Marker All Off
File Type Trace
Save Path Local
Mode Spectrum Analyzer
External Input type Trigger in (TTL signal input)