User`s guide
Table Of Contents
- Overview
- Getting Started
- System Setting
- Making Measurements
- Measuring Multiple Signals
- Measuring a Low-Level Signal
- Improving Frequency Resolution and Accuracy
- Making Distortion Measurements
- One-button Power Measurement
- Making a Stimulus Response Transmission Measurement
- Measuring Stop Band Attenuation of a Low-pass Filter
- Making a Reflection Calibration Measurement
- Measuring Return Loss Using the Reflection Calibration Routine
- Making an Average Power Measurement
- Key Reference
- SCPI Command Reference
- Error Messages
- Menu Map
4System Setting
28 N9340A User’s Guide
Visual and Audio Adjustment
Quick Display Adjustment
The analyzer provides you a quick adjustment for
both brightness and contrast.
Press [SYS] > {Display} to toggle the screen display
status between
Normal and Light.
Manual Display Adjustment
Adjusting Brightness
Press [SYS] > {Brightness} then rotate the knob to
adjust the screen brightness.
Adjusting Contrast
Press [SYS] > {Contrast} then rotate the knob to
adjust the screen contrast.
Setting Key Beep
To activates the key beep function as an indicator
of key operation:
Press [SYS] > {More (1 of 3)} > {Key Beep} On/Off