User`s guide
Table Of Contents
- Overview
- Getting Started
- System Setting
- Making Measurements
- Measuring Multiple Signals
- Measuring a Low-Level Signal
- Improving Frequency Resolution and Accuracy
- Making Distortion Measurements
- One-button Power Measurement
- Making a Stimulus Response Transmission Measurement
- Measuring Stop Band Attenuation of a Low-pass Filter
- Making a Reflection Calibration Measurement
- Measuring Return Loss Using the Reflection Calibration Routine
- Making an Average Power Measurement
- Key Reference
- SCPI Command Reference
- Error Messages
- Menu Map
1 Getting Started
24 N9340A User’s Guide
2 Press [SYS] > {More} > {Preset} > {Save User} to save
the current parameters as the user preset
setting.
3 Press [SYS] > {More} > {Preset} (User) to set the
preset mode to user defined system setting.
Saving Multiple Test Setups
Test Setups that are unique and are necessary to
recall frequently can be saved as an Instrument
State, File Type. Other File Types are described on
“File Types" on page 32.