User`s guide
Table Of Contents
- Overview
- Getting Started
- System Setting
- Making Measurements
- Measuring Multiple Signals
- Measuring a Low-Level Signal
- Improving Frequency Resolution and Accuracy
- Making Distortion Measurements
- One-button Power Measurement
- Making a Stimulus Response Transmission Measurement
- Measuring Stop Band Attenuation of a Low-pass Filter
- Making a Reflection Calibration Measurement
- Measuring Return Loss Using the Reflection Calibration Routine
- Making an Average Power Measurement
- Key Reference
- SCPI Command Reference
- Error Messages
- Menu Map
6 SCPI Command Reference
142 N9340A User’s Guide
Video Bandwidth Automatic
[:SENSe]:BANDwidth|BWIDth:VIDeo:AUTO
OFF|ON|0|1
[:SENSe]:BANDwidth|BWIDth:VIDeo:AUTO?
This command couples the video bandwidth to the
resolution bandwidth.
Video to Resolution Bandwidth Ratio
[:SENSe]:BANDwidth|BWIDth:VIDeo:RATio <para>
[:SENSe]:BANDwidth|BWIDth:VIDeo:RATio?
This command specifies the ratio of the video
bandwidth to the resolution bandwidth.
Video to Resolution Bandwidth Ratio Mode Select
[:SENSe]:BANDwidth|BWIDth:VIDeo:RATio:AUTO
OFF|ON|0|1
[:SENSe]:BANDwidth|BWIDth:VIDeo:RATio:AUTO?
This command selects the auto or manual mode for
the video bandwidth to resolution bandwidth ratio.
*RST State: On
Key Access: [BW/SWP] > {VBW}
*RST Value: 1.00
Range: 0.001 to 1000
Key Access: [BW/SWP] > {VBW/RBW}
*RST State: On
Key Access: [BW/SWP] > {VBW/RBW}