User`s guide
Table Of Contents
- Overview
- Getting Started
- System Setting
- Making Measurements
- Measuring Multiple Signals
- Measuring a Low-Level Signal
- Improving Frequency Resolution and Accuracy
- Making Distortion Measurements
- One-button Power Measurement
- Making a Stimulus Response Transmission Measurement
- Measuring Stop Band Attenuation of a Low-pass Filter
- Making a Reflection Calibration Measurement
- Measuring Return Loss Using the Reflection Calibration Routine
- Making an Average Power Measurement
- Key Reference
- SCPI Command Reference
- Error Messages
- Menu Map
6 SCPI Command Reference
140 N9340A User’s Guide
Turn Averaging On/Off
[:SENSe]:AVERage:TRACe 1|2|3|4|5|6[:STATe]
OFF|ON|0|1
[:SENSe]:AVERage:TRACe 1|2|3|4|5|6[:STATe]?
This command toggles averaging between off and
on. Averaging combines the value of successive
measurements to average out measurement
variations.
Set the Average Count
[:SENSe]:AVERage:TRACe1|2|3|4|5|6:COUNt <para>
[:SENSe]:AVERage:TRACe 1|2|3|4|5|6:COUNt?
This command specifies the number of
measurements that are combined.
*RST State: Off
Key Access: [TRACE] > {Average}
*RST Value: 100
Key Access: [TRACE] > {Average}