User`s guide
Table Of Contents
- Overview
- Getting Started
- System Setting
- Making Measurements
- Measuring Multiple Signals
- Measuring a Low-Level Signal
- Improving Frequency Resolution and Accuracy
- Making Distortion Measurements
- One-button Power Measurement
- Making a Stimulus Response Transmission Measurement
- Measuring Stop Band Attenuation of a Low-pass Filter
- Making a Reflection Calibration Measurement
- Measuring Return Loss Using the Reflection Calibration Routine
- Making an Average Power Measurement
- Key Reference
- SCPI Command Reference
- Error Messages
- Menu Map
SCPI Command Reference 6
N9340A User’s Guide 127
Marker readout: X Value
:CALCulate:MARKer[1]|2|3|4|5|6:X <para>
:CALCulate:MARKer[1]|2|3|4|5|6:X?
This command positions the designated marker on
its assigned trace at the specified trace X value.
The value is in the X- axis units, which can be
frequency or time.
The query returns the current X value of the
designated marker.
Marker readout: Y Value
:CALCulate:MARKer[1]|2|3|4|5|6:Y?
This command reads the current Y value for the
designated marker or delta on its assigned trace.
The value is in Y- axis units for the current trace.
*RST state: Matches the units of the trace on
which the marker is positioned.
Key access: [Marker] > {Normal}
*RST state: Matches the units of the trace on
which the marker is placed.