Specifications

20
Specifications (continued)
Amplitude (continued) Supplemental information
RF Input VSWR (at tuned frequency)
Attenuator setting 0 dB < 1.8 : 1 10 MHz to 3.0 GHz, Nominal
Attenuator setting 10 dB < 1.8 : 1 100 kHz to 10 MHz, Nominal
< 1.5 : 1 10 MHz to 2.5 GHz, Typical
< 1.8 : 1 2.5 GHz to 3.0 GHz, Typical
Attenuator setting 20 dB < 1.6 : 1 100 kHz to 10 MHz, Nominal
< 1.4 : 1 10 MHz to 3.0 GHz, Typical
Spurious response
Second harmonic distortion < –70 dBc Mixer level = –40 dBm, frequency ≥ 50 MHz
Third - order intermodulation
(third order intercept)
+10 dBm, Typical Third-order intermodulation products, 2 x –20 dBm,
reference level –10 dBm, center frequency
300 MHz, frequency separation 200 kHz
RF attenuation = 0 dB
RF preamplifier = OFF
Input related spurious < –70 dBc –40 dBm signal at input mixer, carry offset > 1 MHz
Exception: –60 dBc nominal (2005.35 MHz) with
option XDM or option IBC
Inherent residual response < –88 dBm Input terminated and 0 dB RF attenuation,
preamplifier off, reference level –30 dBm,
f > 30 MHz, RBW ≤ 10 kHz
Sweep Supplemental information
Sweep time
Range 10 ms to 1000 s Span ≥ 1 kHz
6 μs to 200 s Span = 0 Hz (zero span)
Sweep mode Continuous; single
Trigger source Free run; video; external
Trigger slope Selectable positive or negative edge
Triggerdelay
Range 6 μs to 200 s
Resolution 6 μs
Front panel input/output Supplemental information
RF input
Connector and impedance Type -N female; 50 Ω Nominal
10 MHz reference/External trigger input
Reference input frequency 10 MHz
Reference input amplitude 0 to + 10 dBm
Trigger voltage 5 V TTL level Nominal
Connector and output impendance BNC female; 50 Ω Nominal
Connectivity
USB host USB Type-A female, compatible with
USB 2.0 full speed
USB device USB Type-mini AB female
Compatible with USB 2.0 full speed
LAN RJ-45, 10 Base-T