Specifications

13
High accuracy power measurement
The N9340B now supports high-accuracy, USB plug-and-play power measure-
ments as standard when connected to an Agilent U2000 series USB power
sensor. Make true average power measurements for all signal types with wide
dynamic range up to 18 GHz with just the push of a button. The Agilent U2000
USB sensors require no external power supplies and with internal zeroing elimi-
nate the need for external calibration. Without the need for additional boxes,
the user can easily set up, calibrate and control the power meter/sensor via the
analyzer’s USB port. The N9340B can collect, display and save the power meter
results.
The analyzer also provides Pass/Fail testing with user set upper and lower
limits and a Pass/Fail indicator. Test results are shown in dBm and W when
making absolute measurements and in dB and percentage when measurements
are relative. Two display modes are available: Meter or the Chart mode to log
power measurements over time.
N9340B supports Meter and Chart
mode to display the results of power
measurements.
N9340B supports U2000 series USB
power sensors for high accuracy power
measurement.