User`s guide

6 SCPI Command Reference
110 N9340A User’s Guide
Marker Read Y Value
:CALCulate:MARKer[1]|2|3|4|5|6:Y?
This command reads the current Y value for the
designated marker or delta on its assigned trace.
The value is in the Y-axis units for the current
trace (which is often dBm).
*RST State: Matches the units of the trace
on which the marker is
positioned.
Remarks: This command is used to read
the results of marker functions
such as band power and noise
that are displayed in the marker
value field on the analyzer.