User`s guide

Making Measurements 4
N9340B User’s Guide 77
3 Press {Carries Freq} > [100] > {MHz} to set the
carrier frequency.
4 Press {Symbol Rate} > [10] > {MHz} to set the
symbol rate.
5 Press {Filter Setup} > {Ref Filter} > {Nyquist} > {Return}
to set the filter type.
6 Set the attenuation state to Auto (default):
Press {More 1 of 3} > {More 2 of 3} > {Attenuation Auto}
> {More 3 of 3}
7 Press {Y Scale} > {Auto Scale} > {Return} to set the Y
scale.
8 Setting the ASK depth limit and turn on the
limit function:
Press {More 1 of 3} > {Limits} > {ASK Depth UP} > [71]
> {%} > {ASK Depth Low} > [70] > {%} > {Limits on} >
{Return}
9 Press {More} > {More} > {View} > {Eye Diagram} to
view the eye diagram.
The figure below indicates the ASK EYE Diagram
as a measurement result.
Figure 4-27 ASK Eye Diagram