User`s guide

3 System and File
32 N9340B User’s Guide
File
Pressing [SYS] > {File} accesses to the menu that
allows you to manage the file saving and loading.
Viewing file list
Refer to the following two steps to view file list:
1 Select the directory to view.
Press [SYS] > {File} > {View} to toggle the displayed
file list from local memory or an external USB
memory stick.
Select the file type you wish to view.
Press [SYS] > {File} > {File setup} > {File type} to select
a file type.
File Types
Each file type has a specific purpose as defined
below. Pressing [SYS] > {File} > {File Setup} > {File type}
allows the user to select a file type from one of the
following:
• Tra ce ( *.D AT)
A trace file records trace data and controls.
• Screen (*.JPG)
A screen file records graphic information of the
current screen.
• State (*.STA)
A state file records the current controls and
settings of the analyzer. Use this file type for
saving test parameters for future recall, such as
Frequency, Amplitude and BW settings.
• Limit (*.LIM)
A limit file records the limit settings. You can
edit the limit file and transfer this file between
the N9340B and PC software.
NOTE
A USB memory stick of FAT32 or FAT16 format and with only
one memory zone is primarily required when using USB
memory stick for file saving and loading.