User`s guide

2 Getting Started
18 N9340B User’s Guide
Powering on the Analyzer for the First Time
Insert the battery into the analyzer or connect the
analyzer to an external line power supply via the
AC- DC adapter, then press the power switch on
the front panel of your N9340B to power on the
analyzer.
Allow the analyzer to warm- up for 30 minutes
before making a calibrated measurement. To meet
its specifications, the analyzer must meet operating
temperature conditions.
CAU-CAUTION
Use only the original AC-DC adapter or originally supplied
battery for the power source.
The maximum RF input level of an average continuous
power is 33 dBm (or +
50 VDC signal input). Avoid
connecting a signal into the analyzer that exceeds the
maximum level.
Install battery
Press Power Switch