User`s guide

2 Getting Started
16 N9340B User’s Guide
Working with Batteries
Installing a Battery
Viewing Battery Status
Determine the battery status using either of the
following methods:
• Checking the battery icon in the lower- right cor-
ner of the front- panel screen: it indicates the
approximate level of charge.
• Press the gray button in the upper right corner
of the battery, the number of lighted green LED
indicates the percentage of the battery power.
• Press [SYS] > {More} > {Show System} > {Page down}
to check the current battery information.
CAU-CAUTION
Full charge the battery before first using the analyzer.
Step Notes
1 Open the battery cover Use a phillips type screwdriver,
loosen the retaining screw, then
pull the battery cover open.
2 Insert the battery Observe correct battery polarity
orientation when installing.
3 Close the battery cover Push the cover closed, then
re-fasten the cover with the
retaining screw.