User`s guide

Getting Started 2
N9340B User’s Guide 11
Power Requirements
The AC power supplied must meet the following
requirements
:
The AC/DC power supply charger adapter supplied
with the analyzer is equipped with a three- wire
power cord, in accordance with international safety
standards. This power cord grounds the analyzer
cabinet when it is connected to an appropriate
power line outlet. The power cord appropriate to
the original shipping location is included with the
analyzer.
Various AC power cables are available from Agilent
that are unique to specific geographic areas. You
can order additional AC power cords are correct
for use in different areas. The AC Power Cords
table provides a lists of the available AC power
cords, the plug configurations, and identifies the
geographic area in which each cable is typically
used.
The detachable power cord is the product
disconnecting device. It disconnects the main AC
circuits from the DC supply before other parts of
the product. The front- panel switch is only a
standby switch and do not disconnect instrument
from AC LINE power.
Voltage: 100 VAC to 240 VAC
Frequency: 47 to 63 Hz
Power: Maximum 63 W