User`s guide

24 N9320A Spectrum Analyzer
2 Getting Started
Remote Control
The N9320A spectrum analyzer provides USB connection to
your PC, allowing you run the analyzer in remote mode.
The configuration of setting up a remote control for your
N9320A is simple: connect your N9320A and PC which has
installed Agilent IO Libraries Suite with a USB cable.
When you connect your PC with the spectrum analyzer,
power on your spectrum analyzer, the PC detects if there is
a connection of the spectrum analyzer.
If you need the remote control more flexible, you can also
build up your own program by using the SCPI commands.
For more information about Agilent IO Libraries Suite, refer
to http://www.agilent.com/find/iolib
For further information on remote control and programming,
please refer to the N9320A Programmer’s Guide in the
N9320A Help Kit CD.
Remot e
Stan dby
On
TG SOU RCE CAL OUT
50MHz 10dBm
7
·
4
1
0
2
5
89
6
3
Back
Enter
Marker
Peak
Search
Marker
Auto
Tune
Det/
Display
File/
Prin t
BW/
Avg
View/
Trace
MeasMODE
Sweep/
Trig
Local
Save
N9320A SPECTRUM AN ALYZER 9 kHz - 3.0 GHz
PROBE POWER
RF IN 50
50VDC M AX
30dBm 1W MAX
CAT Ⅱ
USB
cable