User`s guide

18 N9320A Spectrum Analyzer
2 Getting Started
Safety Notice
Please read the following warnings and cautions carefully
before you power on the spectrum analyzer to ensure your
personal and instrument safety.
WARNING
Always use a well-grounded, three-pin AC power cord to connect to
power source. Personal injury may occur if there is any interruption of
the AC power cord. Intentional interruption is prohibited. If this product
is to be energized via an external auto transformer for voltage
reduction, make sure that its common terminal is connected to a
neutral (earthed pole) of the power supply.
WARNING
Personal injury may result if the spectrum analyzer covers are removed.
There are no operator service parts inside. To avoid electrical shock,
refer servicing to qualified personnel.
WARNING
Electrical shock may result if the spectrum analyzer is connected from
the power supply while cleaning. Do not attempt to clean internally.
CAUTION
Ensure protection of the input mixer by limiting average continuous power
input to +30 dBm, DC voltage to 50 VDC, maximum pulse voltage to 125 V,
or it may result in instrument damage.